The Mogami W2932 multicore cables are designed for the highest level of audio performance and feature superb electrical and mechanical characteristics while remaining compact, superflexible and easy to use.
-
Features:
- Individually twisted shielded pairs
- XLPE (Cross Linked Polyethylene) insulation provides superb electrical characteristics and will not melt or shrink back during soldering
- Rugged and flexible construction that is easy to handle, even at temperatures down to -4°F (-20°C)
- Channel numbers are printed and underlined on each core jacket to ensure correct identification, regardless of which end is stripped
- Outer jackets of each pair are colour coded by standard resistor colour code, allowing quick identification of conductor pairs
- Inner conductors are also colour coded based on the international standard resistor colour code. Each pair is colour coded by jacket and conductor colour combination.
- Each channel has a drain wire and served (spiral) bare copper shield. The drain wire simplify termination and can be crimped by the same size contact as the inner conductor pair.
-
Specifications:
- Cable
- Ov. Dia. (Approx. mm): 11.5 (0.453")
- Jacket Thickness (Approx. mm): 1.2 (0.047")
- Conductor: 30/0.08A (0.15mm²) #26AWG, (30x #40AWG)
- Insulation: 1.0∅ XLPE (Cross Linked Polyethylene)(0.039")
- Drain Wire: 7/0.18TA (0.18mm²) #25AWG (7x #33AWG)
- Served Shield: Approx. 58/0.10A Served (spiral) Shield
- Jacket (Covering): 2.8∅ Flexible PVC (0.110")
Electrical & Mechanical - DC Resistance at 68°F (20°C):
- Inner Pair Conductor: 0.13Ω/m (0.040Ω/ft)
- Shield: 0.031Ω/m (0.0095Ω/ft) - Capacitance at 1kHz, 68°F (20°C):
- K0: 130pF/m (40pF/ft)
- K1: 12pF/m (3.7pF/ft) - Inductance: 0.6µH/m (0.18µH/ft)
- Electrostatic Noise (Hum Pick-up): 2.5mV Max
- Electromagnetic Noise at 10kHz: 0.1mV Max
(Inductance of the Toroidal Core: 595µH) - Microphonics: 50mV Max at 50kΩ/Load
(Method: Stepping on cable) - Voltage Breakdown: Must withstand at DC 500V/15 sec
- Insulation Resistance at DC 125V, 68°F (20°C): 100000MΩ/x m Minimum
- Tensile Strength of One Pair @ 79°F (26°C, 65% RH): 274N
- Emigration: Non-emigrant to ABS resin
- Applicable Temperature: -4°F - 158°F (-20°C - 70°C)
