The Mogami W2319 is designed to eliminate interference in your instrument cable. Most musical instrument sound pick-ups, for example those in electric guitars, are comprised of high impedance circuits driven mainly by voltage, with very little electrical current flow. That is why handling noise (microphonics) can be a problem for guitar cables. Microphonic noise is caused by the minute voltage generated when a cable is flexed, stepped on, etc. Guitar cables must be designed to prevent this, so a conductive PVC layer is placed under the shield conductor to drain away this voltage.
NOTE: This conductive layer must be stripped back when wiring, or a partial short will result.
-
Specifications:
- Cable
- Conductor:
- Details: 12/0.18TA
- Size (mm²): 0.305mm² (#23AWG) - Insulation:
- Ov. Dia. (mm): 1.6∅ (0.063")
- Material: PE - Sub-Shield:
- Ov. Dia. (mm): 1.8∅ (0.071")
- Material: Conductive PVC (Carbon PVC) - Main-Shield: Served-Shield - Approx. 38/0.16TA
- Jacket:
- Ov. Dia. (mm): 5.0∅ (0.197")
- Material: PVC
Electrical & Mechanical - DC Resistance at 68°F (20°C):
- Inner Conductor: 0.064Ω/m (0.020W/ft)
- Shield Conductor: 0.026Ω/m (0.0079Ω/ft) - Capacitance at 1kHz, 68°F (20°C): 155pF/m (47.3pF/ft)
- Inductance: 0.3µH/m (0.092µH/ft)
- Electrostatic Noize: 0.13mV Max
- Electromagnetic Noise At 10kHz: 0.07mV Max
- Microphonics: 0.3mV Max
- Voltage Breakdown: Must withstand at DC 500V/15 sec
- Insulation Resistance: 100000MΩ x m Min. at DC 500V, 68°F (20°C)
- Flex Life: 11,000 cyles
- Tensile Strength (79°F (26°C), 65%RH): 303 N
- Emigration: Non-emigrant to ABS resin
- Applicable Temperature: -4°F - 140°F (-20°C - 60°C)
