null Skip to main content

Gotham Audio GAC-2 Ultra Pro, 10561, SOLD PER FOOT, NOT TERMINATED

(No reviews yet) Write a Review

Gotham Audio GAC-2 Ultra Pro Details (10561)
Balanced 5 times shielded audio cable! Ultraflexible professional audio cable for microphones. 'Double Reussen shield', velvet matte non-light reflecting PVC-jacket material. A unique construction new invented by Gotham design. Each conductor is shielded with a lap shield 100% covering copper wires (7) (Reussen shield) plus a conductive separation layer (6) (aluminium coated polyester ). This conductor is twisted around conductor nr 2 and turn is hold in place with another aluminium coated layer, followed by Gotham's unique double Reussen shield. This cable is absolutely uncompromised to achieve maximum shielding possible while the flexibility and durability is still very good and the cable can be used in mobile applications as well. The cable is built with a stabile 110 ohm impedance and can be used for analogue balanced audio signals as well as digital audio signals in the AES-EBU format. Ideal cable for accomodation of XLR-connectors with corresponding 8mm diameter cable claps

We can also cover the cable with a protective clear sleeve, aka EasyCoil™, and/or our NoKink™ tertiary jacket that prevent the ends of an XLR cable to sag, or bend easily. 

The EasyCoil™ technology, as the name suggests, assures the cables are extremely easy to coil due to the secondary jacket. This helps the cable to hold its form (when properly wound) and provides extra protection, resulting in a longer life. Our NoKink™ practice is geared toward protecting the ends of the cables. Since XLR connectors are heavy, cables often develop kinks at each end over time. Our tertiary “jacket” is applied to both ends to prevent this from happening. With these two features combined, the result is a high-quality, easy to manage cable that will go the distance and then some.



1 = Jacket: PVC, max. Ø 8,00 mm Purpur/Violett
2 = Over all Shield No. 1 Bare copper wires (0.10 mm) 100% coverage
3 = Over all Shield No. 2 Bare copper wires (0.10 mm) 100% coverage
4 = Layer Polyester nonwoven thermally bonded, both sides aluminium coated
= Seperation Filler material viscose
= conductor shield layer Polyester nonwoven thermally bonded, both sides aluminium coated
7 = conductor shield Bare copper wires (0.10 mm) 100% coverage
8 = Insulation Cellular PE, Ø 2.00mm
= Conductor Stranded bare LCOF copper wires 64 x 0.10mm (0.50 mm²) 64x38AWG = 26AWG

Technical datas:

Conductor resistance:   max 39 ohm/km
Shielding resistance:   < 28 Ohm/km
Capacitance:   Conductor/ Cond. max. 50 nF/km
Conductor/Schild   max. 135 nF/km
Impedance   110 Ohm
Test voltage:   2000 veff
Temperature range: flexi-installed: -5° to +50° C
  fix-installed: -30° to +70° C